Overo Conduit LoRa Gateway Kit (915 MHz)
With the Overo Conduit LoRa Gateway Kit (915 MHz), you will have everything you need to quickly deploy a LoRaWAN gateway for Overo COMs.
Overo Conduit LoRa Gateway is a LoRa® gateway solution with 10/100 Base-T Ethernet, and a header for the RisingHF RHF0M301 gateway and concentrator module.
This version is reserved for North America Region.
Overo Coduit Gateway Kit
With the Gumstix Overo and the RHF0M301 gateway module, the Overo Conduit can deliver long-range communications over LoRaWAN™ between the Internet and LoRa® devices. This kit has all of the components needed to deploy your gateway. The included Overo AirSTORM-Y incorporates the TI WiLink8 WiFi/Bluetooth module for further connectivity options.
- Overo AirSTORM-Y COM
- Overo Conduit LoRa Gateway expansion board
- RisingHF RHF0M301 gateway and Concentrator module
- Standard-A to micro-B USB cable
- 5V 3.5A power adapter
Important: 902 - 928 MHz frequency band is reserved for North America. If you are located in Europe, you should look at Overo Conduit LoRa Gateway Kit (868 MHz) or Overo Conduit LoRa Gateway Kit (434 MHz).
Customize Your Board
The Overo Conduit LoRa Gateway design included in this kit is available in Geppetto for you to make it your own. Add sensors and GPS or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Learn more about this product by checking out the following:
Articles from Gumstix Blog
|Access Point Mode||
2 x 70-pin AVX connectors
27-Pin (OMAP ISP)
Up to 2,000 Dhrystone MIPS
Texas Instruments TPS65950
Texas Instruments Sitara AM3703
|Processor Base Clock||
|Processor Max Clock||
via microSD Card Slot
Micro B USB Plug
|U.FL Antenna with Collar||U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.|
|microSD Card Slot||An onboard card-slot for system storage expansion using microSD cards.||Specs|
|Texas Instruments TPS65950 Power Management||The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs.||Specs|
|TI WiLink8 WL1831MOD||The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design.||Specs|
|1GB Flash||Package-on-package (PoP) memory solution that minimizes power consumption, maximizes board space and increases speed.|
|Texas Instruments AM3703 Applications Processor||1GHz ARM Cortex-A8 Sitara AM3703 high-performance microprocessor designed to provide best in class ARM and graphics performance while delivering low power consumption. According to Texas Instruments, AM3703 is fully backward compatible with previous OMAP™ processors.||Specs|
|Micro B USB Plug||Micro B USB Plug|
|Connector (Power Jack Medium)||PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug|
|Microchip (SMSC) LAN9221 Ethernet Controller||A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput.||Specs|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|U.FL Connector||Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.|
|Hirose 27-Pin Camera Connector (Overo COMs)||Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW)||Specs|
|70-Pin AVX Connector (Male – Overo COMs)||Connect your Gumstix Overo COM to an expansion board with these 70-pin AVX connectors.||Specs|
|70-Pin AVX Connectors (Female – Overo Expansion)||Connect an Overo COM to an expansion board with these 70-pin AVX connectors.||Specs|