Gumstix Pi Conduit LoRa Gateway Kit (434 MHz)
With the Gumstix Pi Conduit LoRa Gateway Kit (434 MHz), you can quickly deploy a LoRaWAN gateway for Raspberry Pi® Compute Module (not included).
Gumstix Pi Conduit LoRa Gateway is an LTE-ready LoRa® gateway solution with a NimbeLink® Skywire™ connector, Ethernet over USB, and a header for the RisingHF RHF0M301 gateway and concentrator module.
This version is reserved for Europe Region.
Gumstix Pi Conduit Gateway Kit
With the Raspberry Pi® Compute Module or CM3 and the RHF0M301 gateway module, the Gumstix Pi Conduit can deliver long-range communications over LoRaWAN™ between the Internet and LoRa® devices. Add a NimbeLink® Skywire™ LTE modem and deploy this gateway anywhere.
- RisingHF RHF0M301 Gateway and Concentrator Module
- Gumstix Pi Conduit LoRa Gateway expansion board
- Standard-A to micro-B USB cable
- 5V 3.5A power adapter
Raspberry Pi® Compute Module and Skywire LTE modem not included.
Important: 434 MHz frequency band is reserved for Europe. If you are located in North America, you should look at Gumstix Pi Conduit LoRa Gateway Kit (915 MHz).
Customize Your Board
The Gumstix Pi Conduit LoRa Gateway design included in this kit is available in Geppetto for you to make it your own. Add sensors and GPS or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Learn more about this product by checking out the following:
Articles from Gumstix Blog
10/100 Ethernet via USB 2.0
Micro B USB Plug
2-port USB 2.0 hub
|Micro B USB Plug||Micro B USB Plug|
|SODIMM Connector||SODIMM connector to DDR2 200 pin module, such as the Raspberry Pi Compute Module|
|Connector (Power Jack Medium)||PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug|
|LAN9512 Ethernet Controller and USB Hub||IC USB 2.0 ETHER CTRLR 64QFN|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|